Automatic contact of city-car with powering block



Automatic contact of city-car with powering block

{103}-[3802]-18.11.2017 

City-car (see disclosure in http://www.judbarovski.blogspot.co.il/2017/11/city-car-for-alliance-of-renault-nissan.html ) uses a foldable wing with either comb- or brush contact being inserted through a slot of a powering block for powering, while the city-car traveling.
Two thin strips (e.g. magnetic or luminescent paint) are marked along of the said slot. One strip is slightly above the slot and the second is below the slot.
The said wing is equipped by an automatic tracking system reacting to the said strips and allows the end the wing to be inserted automatically between the said strips directly through the slot. The wing has two sorts of sensors. One of them is a safety sensor and prevents injuries of somebody or something, if being in front of the wing, which is quickly folded in that case. The second of them is positioning group of sensors for connecting of the wing contact for powering from the powering block. It is conventional automatics and doesn’t need in special explanations.
The said automatics isn’t expensive, and would be very cheap in comparison with a total cost of the city-car being very cheap too, especially if being them mass produced.  

Author: David Judbarovski, principle inventor, retired engineer, Israel
More fresh archive: http://judbarovski.blogspot.be
Archive since 2006 yr.: http://judbarovski.livejournal.com

Comments

Popular posts from this blog

Progressive city-car realization and powering-Updated,#1

Equipment for Short Take-off and Landing (E-STOL)

Breakthrough new fuel is better than oil