Automatic contact of city-car with powering block
Automatic contact of city-car with powering
block
{103}-[3802]-18.11.2017
City-car (see disclosure in http://www.judbarovski.blogspot.co.il/2017/11/city-car-for-alliance-of-renault-nissan.html
) uses a foldable wing with either comb- or brush contact being inserted through
a slot of a powering block for powering, while the city-car traveling.
Two thin strips (e.g. magnetic or
luminescent paint) are marked along of the said slot. One strip is slightly
above the slot and the second is below the slot.
The said wing is equipped by an
automatic tracking system reacting to the said strips and allows the end the
wing to be inserted automatically between the said strips directly through the
slot. The wing has two sorts of sensors. One of them is a safety sensor and
prevents injuries of somebody or something, if being in front of the wing, which
is quickly folded in that case. The second of them is positioning group of
sensors for connecting of the wing contact for powering from the powering
block. It is conventional automatics and doesn’t need in special explanations.
The said automatics isn’t
expensive, and would be very cheap in comparison with a total cost of the
city-car being very cheap too, especially if being them mass produced.
Author: David Judbarovski, principle
inventor, retired engineer, Israel
Archive since 2006 yr.: http://judbarovski.livejournal.com
Comments
Post a Comment